Black Fox PRO

Out of Stock - Pre-Order from our next batch and save. Pre-Order Shipping late June.

Industrial 2” x 72” Belt Grinder with Electric Tensioning System

The Black Fox PRO builds on the proven Black Fox ONE platform and introduces our electric tensioning system, engineered specifically for industrial environments that demand precision, repeatability, and reduced operator fatigue. With the ability to increase or decrease belt tension at the flick of a switch, the PRO delivers consistent abrasive performance across long production cycles.

To support visibility in heavy‑use shop conditions, the PRO also includes an industrial LED work light housed in a sealed enclosure. Designed for dirty, high‑duty environments, it provides clear illumination of scribe lines and contact points and features built‑in thermal protection for extended service life.

Industrial‑Grade Advantages

• Electric belt tensioning — Adjust belt pressure instantly with a switch for faster workflow transitions and consistent abrasive tracking.

• Integrated industrial LED lighting — High‑output illumination in a rugged enclosure designed for continuous shop use.

• Rapid vertical/horizontal positioning — Tool‑less mechanical lock allows orientation changes in seconds.

• Lift‑assist mechanism — Balanced movement requires only ~10 lbs of force, improving ergonomics and reducing strain.

• Integrated motor control — Enclosed VFD and controls reduce wiring complexity and protect components.

• Auxiliary expansion ports — Ready for specialized attachments and future tooling.

• Forward/Stop/Reverse standard — Supports controlled finishing, deburring, and alignment operations.

• Oversized engineered — Provides long‑term mechanical stability under continuous load.

Complete System Package

Every Black Fox PRO includes:

• Electric tensioning system

• Industrial LED work light

• Black Fox ONE chassis

• Black Fox contact platen

• Two 1.5” square aluminum tooling arms

• Large steel work rest with abrasion‑resistant coating

• Industrial 2 HP, 3600 rpm motor

• VFD with integrated speed and directional control

• 5” crowned drive wheel

• 4” crowned tracking wheel

• Positioning assist spring

• Tool‑less arm adjustment

Production Lead Time

5–10 business days from order.

Check out our product overview video , interview with CK Knife and Tool, and review by Simple Little Life

Grinder Setup Instructions

Buy with confidence with our return and warranty guarantee.

Black Fox ONE

Out of Stock - Pre-Order from our next batch and save. Pre-Order Shipping late June.

Industrial‑Grade 2” x 72” Belt Grinder Built for Continuous Duty

The Black Fox ONE is a production‑ready 2” x 72” belt grinder engineered for industrial environments where reliability and throughput matter. Its metal chassis, integrated controls, and modular tooling system deliver consistent performance across demanding grinding, shaping, and finishing applications. Designed for shops that expect long service life and minimal downtime, the ONE provides a robust platform at a highly competitive cost.

Core Advantages for Industrial Use

• Rapid vertical/horizontal indexing — Tool‑less, mechanical locking system enables fast orientation changes to support varied workflows.

• Lift‑assist mechanism — Balanced movement requires only ~10 lbs of force, reducing operator fatigue and improving ergonomics.

• Integrated motor control — Enclosed VFD and control interface reduce wiring complexity and protect components in shop environments.

• Auxiliary expansion ports — Ready for process‑specific attachments, automation add‑ons, and future tooling.

• Forward/Stop/Reverse standard — Supports controlled abrasive finishing, deburring, and precision alignment tasks.

• Over engineered — Provides increased rigidity and long‑term mechanical stability under continuous load.

Complete System Package

Each Black Fox ONE ships with:

• Contact platen

• Two 1.5” square aluminum tooling arms

• Large mild‑steel work rest with low‑friction coating

• Industrial 2 HP, 3600 rpm motor

• VFD with integrated speed and directional control

• 5” crowned drive wheel

• 4” crowned tracking wheel

• Gas tension spring for consistent belt pressure

Production Lead Time

5–10 business days from order.

Thank you for your support!

Industrial Customization

For specialized workflows, fixture requirements, or unique shop layouts, custom configurations are available upon request.

Check out our product overview video , interview with CK Knife and Tool, and review by Simple Little Life.

Grinder setup instructions on YouTube

Buy with confidence with our return and warranty guarantee.

The Black Fox Glide uses the latest in slide technology and magnetic hold down to easily and accurately surface grind steel stock to the perfect dimension, improve surface finish, or add a taper.

Included:

1. Large 15" flat surface

2. Digital depth readout - metric units

3. Ultra smooth glide system

4. Magnetic on/off switches for easy surface cleaning (no power required)

5. Surface tilting for creating tapers

6. 2”x6" serrated 90 durometer wheel

7. 1 - 20" tooling arm

8. Fits on any grinder that uses a 1.5" tooling arm

Current lead time: 3-4 weeks

For international shipping please contact us for your shipping rate.

Tutorials:

Planing Wood with a 2X72” Belt Grinder

Tapering Tangs with a 2x72” Belt Grinder

This platen is decked out with high end specifications. We use a 2" and 5" smooth rubber wheels on each side of a thick 1080 cold rolled platen plate with a 8" work surface. The platen plate is supported by over sized "L" brackets to ensure no flexing during grinding. The platen also comes with a removable glass shelf for a thick piece of glass to reduce friction and wear to your grinding surface. The work rest is made from aluminum with an orbital finish to give a drool worthy finish.

The platen matches KMG bolt spacing.

Included:

1. 1080 platen (8" work surface)

2. removable glass shelf

3. 2" rubber contact wheel (70 durometer)

4. 5" rubber contact wheel (70 durometer)

5. Over sized platen plate

6. Over sized "L" brackets

7. 1/2" hardware

Current lead time is 1-2 days.

Tooling arm and horizontal work rest is not included.